PolyStrippa* Renovators Choice
 
 
DESCRIPTION
POLYSTRIPPA* RENOVATOR'S CHOICE is a gelled solvent-based paint and varnish remover, free of methylene chloride. It is designed for easy application on vertical surfaces and is green in colour. It remains active for at least 24 hours.
 
SIZES AVAILABLE
POLYSTRIPPA* RENOVATOR'S CHOICE is available in 500mL and 1L plastic wide mouth tubs.
 
USES
POLYSTRIPPA* RENOVATOR'S CHOICE can be used for removing oil and water based paints. It will remove all household paints and some industrial and marine finishes. It will remove textured acrylic finishes, eg. POLYTEX*. After removal, surfaces should be washed and allowed to dry thoroughly.
 
TECHNICAL FEATURES
 
  • No methylene chloride fumes.
  • Remains active for over 24 hours.
  • Penetrates deeply.
  • Washes off with water.
  • Use straight from the tub.
  • Non-caustic, no neutralising of the surface is necessary.
  • POLYSTRIPPA* RENOVATOR'S CHOICE is a non-drip gel formula.
  • Can be used on painted metals.
  • Easily applied using a paint brush.
 
LIMITATIONS
 
  • Not suitable for application to fibreglass, P.V.C., acrylics, linoleum, rubber or plastics.
  • Will not remove Kalsomine, penetrating stains, and some specialist industrial finishes.
 
SAFETY DIRECTIONS
Open can carefully, as there may be a pressure build up. Use outdoors only - Dichloromethane vapour is harmful to health on prolonged exposure. Avoid breathing vapour. Move item to be stripped to an open, shady, outdoor area to ensure adequate ventilation. Do not swallow. The product forms dangerous gas near radiators or naked flames.Do not smoke while using the product. Avoid contact with skin and eyes. Wear eye protection and solvent resistant gloves. Always wash hands before smoking, eating, drinking or using the toilet. Intentional misuse by deliberately inhaling vapour of this product can be harmful or fatal.
 
STORAGE
Store container in a cool place to avoid pressure build-up. Store away from naked flame, radiators etc.
 
Note: Please read directions on pack before using.

Go back to previous page | Return to Top